| Autor |
Beitrag |
galagher
      
Beiträge: 2562
Erhaltene Danke: 46
Windows 10 Home
Delphi 10.1 Starter, Lazarus 2.0.6
|
Verfasst: So 30.05.04 21:09
Hallo!
Sowas hab ich ja noch nie gesehen: Mein Programm ruft rekursiv eine Funktion auf (sucht Files in allen Ordnern) und vergleicht die Grösse, Datum, Zeit und Attribute mit den Werten, die es zuvor irgendwann in einer Datei gespeichert hat. Das geht auch ganz gut, es prüft ca. 1600 Dateien und schreibt deren Namen, Pfad usw. in ein StringGrid, aber dann wird es immer langsamer.
Also habe ich GlobalMemoryStatus eingebaut, um den freien Speicher zu sehen - der bleibt zunächst konstant und fällt urplötzlich auf 0 ab - und dann steht Windows, und die Maus ist wie festgeklebt! In einer Minute schafft mein Proggi dann grad mal 1 Datei. Es tut weiter, eben extrem langsam.
Ich vergesse nicht, irgendwas freizugeben, alles schon überprüft. Egal, ob mit ins StringGrid schreiben oder ohne, es ist immer dasselbe, immer bei ca. 1600 Dateien. Danach bleibt Windows auch langsam, bis zum Neustart.
Ich meine, wenn ich Speicher verbrauche, dann doch wohl von Anfang an, also vom 1. Aufruf der Funktion, nicht erst mitten drin! Kann mir jemand einen Tip geben, was das sein kann? Sonst kann ich das Projekt vergessen! Danke euch!!!
_________________ gedunstig war's - und fahle wornen zerschellten karsig im gestrock. oh graus, es gloomt der jabberwock - und die graisligen gulpen nurmen!
|
|
Christian S.
      
Beiträge: 20451
Erhaltene Danke: 2264
Win 10
C# (VS 2019)
|
Verfasst: So 30.05.04 21:32
Ist es möglich, dass zu diesem Zeitpunkt ein Verzeichnis mit extrem vielen Dateien oder Unterverzeichnissen erreicht wird und deswegen schlagartig soviel Speicher verbraucht wird?
_________________ Zwei Worte werden Dir im Leben viele Türen öffnen - "ziehen" und "drücken".
|
|
galagher 
      
Beiträge: 2562
Erhaltene Danke: 46
Windows 10 Home
Delphi 10.1 Starter, Lazarus 2.0.6
|
Verfasst: Mo 31.05.04 07:30
| Peter Lustig hat folgendes geschrieben: | | Ist es möglich, dass zu diesem Zeitpunkt ein Verzeichnis mit extrem vielen Dateien oder Unterverzeichnissen erreicht wird und deswegen schlagartig soviel Speicher verbraucht wird? |
Danke für die rasche Antwort! Hab's beobachtet: der Speicher begann sich im System-Ordner zu verringern, lief aber alles normal. Danach fiel er wieder total ab. Wenn ich nicht abgebrochen hätte, wäre es wieder 0 geworden. Was kann man da tun?
_________________ gedunstig war's - und fahle wornen zerschellten karsig im gestrock. oh graus, es gloomt der jabberwock - und die graisligen gulpen nurmen!
|
|
MSCH
      
Beiträge: 1448
Erhaltene Danke: 3
W7 64
XE2, SQL, DevExpress, DevArt, Oracle, SQLServer
|
Verfasst: Mo 31.05.04 08:20
kannst du mal etwas code zeigen ?
grez
msch
_________________ ist das politisch, wenn ich linksdrehenden Joghurt haben möchte?
|
|
galagher 
      
Beiträge: 2562
Erhaltene Danke: 46
Windows 10 Home
Delphi 10.1 Starter, Lazarus 2.0.6
|
Verfasst: Mo 31.05.04 08:32
| MSCH hat folgendes geschrieben: | | kannst du mal etwas code zeigen ? |
Nachdem ich echt keine Ahnung habe, WAS das Problem verursacht, poste ich am Besten die gesamte Prozedur (hab' vorhin in der Eile Funktion geschrieben).
Wenn ihr euch da durchwühlt... Das Prinzip: Suche nach Dateien, feststellen von Grösse, Attribut un Datum/Zeit, feststellen, ob Sonderzeichen (ausser ä,ö,ü,ß usw.) im Namen. Vergleichen der aktuellen Werte mit zuvor gespeicherten, bei Abweichungen "GEÄND." in StringGrid1 ausgeben, sonst "OK", bei Fehler "XXXXX". Jeder Ordner enthält eine Datei chklist.fst.
1: 2: 3: 4: 5: 6: 7: 8: 9: 10: 11: 12: 13: 14: 15: 16: 17: 18: 19: 20: 21: 22: 23: 24: 25: 26: 27: 28: 29: 30: 31: 32: 33: 34: 35: 36: 37: 38: 39: 40: 41: 42: 43: 44: 45: 46: 47: 48: 49: 50: 51: 52: 53: 54: 55: 56: 57: 58: 59: 60: 61: 62: 63: 64: 65: 66: 67: 68: 69: 70: 71: 72: 73: 74: 75: 76: 77: 78: 79: 80: 81: 82: 83: 84: 85: 86: 87: 88: 89: 90: 91: 92: 93: 94: 95: 96: 97: 98: 99: 100: 101: 102: 103: 104: 105: 106: 107: 108: 109: 110: 111: 112: 113: 114: 115: 116: 117: 118: 119: 120: 121: 122: 123: 124: 125: 126: 127: 128: 129: 130: 131: 132: 133: 134: 135: 136: 137: 138: 139: 140: 141: 142: 143: 144: 145: 146: 147: 148: 149: 150: 151: 152: 153: 154: 155: 156: 157: 158: 159: 160: 161: 162: 163: 164: 165: 166: 167: 168: 169: 170: 171: 172: 173: 174: 175: 176: 177: 178: 179: 180: 181: 182: 183: 184: 185: 186: 187: 188: 189: 190: 191: 192: 193: 194: 195: 196: 197: 198: 199: 200: 201: 202: 203: 204: 205: 206: 207: 208: 209: 210: 211: 212: 213: 214: 215: 216: 217: 218: 219: 220: 221: 222: 223: 224: 225: 226: 227: 228: 229: 230: 231: 232: 233: 234: 235: 236: 237: 238: 239: 240: 241: 242: 243: 244: 245: 246: 247: 248: 249: 250: 251: 252: 253: 254: 255: 256: 257: 258: 259: 260: 261: 262: 263: 264: 265: 266: 267: 268: 269: 270: 271: 272: 273: 274: 275: 276: 277: 278: 279: 280: 281: 282: 283: 284: 285: 286: 287: 288: 289: 290: 291: 292: 293: 294: 295: 296: 297: 298: 299: 300: 301: 302: 303: 304: 305: 306: 307: 308: 309: 310: 311: 312: 313: 314: 315: 316: 317: 318: 319: 320: 321: 322: 323: 324: 325: 326: 327: 328: 329: 330: 331: 332: 333: 334: 335: 336: 337: 338: 339: 340: 341: 342: 343: 344: 345: 346: 347: 348: 349: 350: 351: 352: 353: 354: 355: 356: 357: 358: 359: 360: 361: 362: 363: 364: 365: 366: 367: 368: 369: 370: 371: 372: 373: 374: 375: 376: 377: 378: 379: 380: 381: 382: 383: 384: 385: 386: 387: 388: 389: 390: 391: 392: 393: 394: 395: 396: 397: 398: 399: 400: 401: 402: 403: 404: 405: 406: 407: 408: 409: 410: 411: 412: 413: 414: 415: 416: 417: 418: 419: 420: 421: 422: 423: 424: 425: 426: 427: 428: 429:
| procedure TForm1.FindExecutableFiles(Path, Mask: String; List: TStrings; SubFolder: Boolean); var I, Attr, k: Integer; Search: TSearchRec; chklist: Boolean; S, OldSize, NewSize: String; begin caption:=inttostr(MemoryStatus(3)); Attr := faArchive + faReadOnly + faHidden + faSysFile; Path := IncludeTrailingPathDelimiter(Path); P := Path; Fail := False;
Application.ProcessMessages;
if Stop then begin SysUtils.FindClose(Search); exit; end;
with TStringList.Create do try CommaText := Mask; chklist := not (FileExists(Path+ChkFile));
if not chklist then begin try List2.LoadFromFile(Path+ChkFile); List2.Text := ShiftStr(List2.Text,-85); Inc(ChkFileCount); if (List2.Count <= 2) and (List2[1] = '¸µ') then if not FileExists(GetWord(List2[0],1)) then begin EraseFile(Path+ChkFile); Dec(ChkFileCount); end; except SysUtils.FindClose(Search); end;
List2.Clear; end;
SetFileAttr(Path+ChkFile, '-r-h-s+a');
for k := 0 to Count - 1 do if FindFirst(Path + Strings[k], Attr, Search) = 0 then repeat for I := 1 to Length(Search.Name) do if ((Ord(Search.Name[I]) < 33) or (Ord(Search.Name[I]) > 126)) and not (Ord(Search.Name[I]) = 32) and not (Ord(Search.Name[I]) = 196) and not (Ord(Search.Name[I]) = 214) and not (Ord(Search.Name[I]) = 220) and not (Ord(Search.Name[I]) = 228) and not (Ord(Search.Name[I]) = 246) and not (Ord(Search.Name[I]) = 252) and not (Ord(Search.Name[I]) = 223) then begin StringGrid1.Cells[3, List.Count+1] := ' !'; Form2.ListBox1.Items.Add(''); Form2.ListBox1.Items.Add('#'+Path+Search.Name); Form2.ListBox1.Items.Add(' Dateiname enthält Sonderzeichen'+S); break; end;
if Stop then begin SysUtils.FindClose(Search); exit; end;
if chklist then begin List2.Add(ExtractShortPathName(Path+Search.Name)+' '+ IntToStr(FileSizeByName(Path+Search.Name))+' '+ GetFileDateTime(Path+Search.Name)+' '+ GetFileAttr(Path+Search.Name)); end else begin try List2.LoadFromFile(Path+ChkFile); List2.Text := ShiftStr(List2.Text,-85); except SysUtils.FindClose(Search); end; end;
if not (ExtractShortPathName(Path) = ExtractFilePath(GetWord(List2[Counter],1))) then begin if ExtractFilePath(GetWord(List2[Counter],1)) > '' then begin EraseFile(Path+ChkFile); Erased := True; end else Erased := False;
List2.Delete(Counter); List2.Text := ShiftStr(List2.Text,85); try if List2[List2.Count-1] = 'b_' then List2.Delete(List2.Count-1); except ; end; List2.Text := ShiftStr(List2.Text,-85);
StringGrid1.Cells[1, List.Count] := Search.Name; StringGrid1.Row := StringGrid1.RowCount-1; if List.Count > 1 then StringGrid1.RowCount := StringGrid1.RowCount+1; StringGrid1.Refresh;
List2.Insert(Counter,(ExtractShortPathName(Path+Search.Name)+' '+ IntToStr(FileSizeByName(Path+Search.Name))+' '+ GetFileDateTime(Path+Search.Name)+' '+ GetFileAttr(Path+Search.Name)));
List2.Text := ShiftStr(List2.Text,85); try if List2[List2.Count-1] = 'b_' then List2.Delete(List2.Count-1); except ; end;
try if (Pos(Form3.CheckBox1.Hint, ExtractShortPathName(Path)) = 0) and (Pos(Form3.CheckBox2.Hint, ExtractShortPathName(Path)) = 0) and (Pos(Form3.CheckBox3.Hint, ExtractShortPathName(Path)) = 0) and (Pos(Form3.CheckBox4.Hint, ExtractShortPathName(Path)) = 0) and not (ExtractShortPathName(Path) = Form3.CheckBox5.Hint) and not (ExtractShortPathName(Path) = Form3.CheckBox6.Hint) and not (ExtractShortPathName(Path) = Form3.CheckBox7.Hint) and not (ExtractShortPathName(Path) = Form3.CheckBox8.Hint) then List2.SaveToFile(Path+ChkFile); except Form2.ListBox1.Items.Add(' Konnte nicht gespeichert werden: '+Path+ChkFile); end;
List2.Text := ShiftStr(List2.Text,-85);
if Erased then StringGrid1.Cells[2, List.Count] := ' KORR.' else StringGrid1.Cells[2, List.Count] := ' NEU';
List2.Clear; Form2.ListBox1.Items.Add(''); Form2.ListBox1.Items.Add('#'+Path+Search.Name); Form2.ListBox1.Items.Add(' Falscher Pfad in '+Path+ChkFile); Form2.ListBox1.Items.Add(' - korrigiert'); SysUtils.FindClose(Search); break; end;
List.Add(Path+Search.Name); StringGrid1.Cells[0, List.Count] := Path; StringGrid1.Cells[1, List.Count] := Search.Name;
try if ExtractShortPathName(Path+Search.Name) = GetWord(List2[Counter],1) then begin if not (IntToStr(FileSizeByName(Path+Search.Name)) = GetWord(List2[Counter],2)) or not (GetFileDate(Path+Search.Name) = GetWord(List2[Counter],3)) or not (GetFileTime(Path+Search.Name) = GetWord(List2[Counter],4)) or not (GetFileAttr(Path+Search.Name) = GetWord(List2[Counter],5)) then begin if (Pos(Form3.CheckBox1.Hint, ExtractShortPathName(Path)) > 0) and (Pos(Form3.CheckBox2.Hint, ExtractShortPathName(Path)) > 0) and (Pos(Form3.CheckBox3.Hint, ExtractShortPathName(Path)) > 0) and (Pos(Form3.CheckBox4.Hint, ExtractShortPathName(Path)) > 0) or (ExtractShortPathName(Path) = Form3.CheckBox5.Hint) or (ExtractShortPathName(Path) = Form3.CheckBox6.Hint) or (ExtractShortPathName(Path) = Form3.CheckBox7.Hint) or (ExtractShortPathName(Path) = Form3.CheckBox8.Hint) then begin Status := ' ------------'; StringGrid1.Cells[2, List.Count] := Status; end else begin StringGrid1.Cells[2, List.Count] := 'GEÄND.'; Aktualisieren := True; if CheckBox1.Checked then Sound(400,25); if Form2.ListBox1.Items.Count > 0 then Form2.ListBox1.Items.Add('');
Form2.ListBox1.Items.Add('#'+StringGrid1.Cells[0, List.Count]+StringGrid1.Cells[1, List.Count]);
if not (IntToStr(FileSizeByName(Path+Search.Name)) = GetWord(List2[Counter],2)) then begin NewSize := SysUtils.FormatFloat('#,#',FileSizeByName(Path+Search.Name)); OldSize := SysUtils.FormatFloat('#,#',StrToInt(GetWord(List2[Counter],2))); while Length(NewSize) < 11 do NewSize := ' '+NewSize; while Length(OldSize) < 11 do OldSize := ' '+OldSize; S := OldSize+' '+NewSize; StringGrid1.Cells[4, List.Count] := S; Form2.ListBox1.Items.Add(' Grösse wurde geändert:'); Form2.ListBox1.Items.Add(' Alt: '+OldSize+' Bytes Neu: '+NewSize+' Bytes'); end;
if not (GetFileDate(Path+Search.Name) = GetWord(List2[Counter],3)) then begin StringGrid1.Cells[5, List.Count] := GetWord(List2[Counter],3)+' '+GetFileDate(Path+Search.Name); Form2.ListBox1.Items.Add(' Datum wurde geändert:'); Form2.ListBox1.Items.Add(' Alt: '+GetWord(List2[Counter],3)+' Neu: '+GetFileDate(Path+Search.Name)); end;
if not (GetFileTime(Path+Search.Name) = GetWord(List2[Counter],4)) then begin StringGrid1.Cells[6, List.Count] := GetWord(List2[Counter],4)+' '+GetFileTime(Path+Search.Name); Form2.ListBox1.Items.Add(' Zeit wurde geändert:'); Form2.ListBox1.Items.Add(' Alt: '+GetWord(List2[Counter],4)+' Neu: '+GetFileTime(Path+Search.Name)); end;
if not (GetFileAttr(Path+Search.Name) = GetWord(List2[Counter],5)) then begin OldSize := GetWord(List2[Counter],5); if OldSize = 'R' then OldSize := 'R...'; if OldSize = 'RH' then OldSize := 'RH..'; if OldSize = 'RHS' then OldSize := 'RHS.'; if OldSize = 'RHSA' then OldSize := 'RHSA'; if OldSize = 'RHA' then OldSize := 'RH.A'; if OldSize = 'RSA' then OldSize := 'R.SA'; if OldSize = 'RA' then OldSize := 'R..A'; if OldSize = 'RS' then OldSize := 'R.S.'; if OldSize = 'S' then OldSize := '..S.'; if OldSize = 'SA' then OldSize := '..SA'; if OldSize = 'H' then OldSize := '.H..'; if OldSize = 'HA' then OldSize := '.H.A'; if OldSize = 'HS' then OldSize := '.HS.'; if OldSize = 'HSA' then OldSize := '.HSA'; if OldSize = 'S' then OldSize := '..S.'; if OldSize = 'SA' then OldSize := '..SA'; if OldSize = 'A' then OldSize := '...A'; if OldSize = '' then OldSize := '....';
NewSize := GetFileAttr(Path+Search.Name); if NewSize = 'R' then NewSize := 'R...'; if NewSize = 'RH' then NewSize := 'RH..'; if NewSize = 'RHS' then NewSize := 'RHS.'; if NewSize = 'RHSA' then NewSize := 'RHSA'; if NewSize = 'RHA' then NewSize := 'RH.A'; if NewSize = 'RSA' then NewSize := 'R.SA'; if NewSize = 'RA' then NewSize := 'R..A'; if NewSize = 'RS' then NewSize := 'R.S.'; if NewSize = 'S' then NewSize := '..S.'; if NewSize = 'SA' then NewSize := '..SA'; if NewSize = 'H' then NewSize := '.H..'; if NewSize = 'HA' then NewSize := '.H.A'; if NewSize = 'HS' then NewSize := '.HS.'; if NewSize = 'HSA' then NewSize := '.HSA'; if NewSize = 'S' then NewSize := '..S.'; if NewSize = 'SA' then NewSize := '..SA'; if NewSize = 'A' then NewSize := '...A'; if NewSize = '' then NewSize := '....'; StringGrid1.Cells[7, List.Count] := OldSize+' '+NewSize; Form2.ListBox1.Items.Add(' Attribut(e) wurde(n) geändert:'); Form2.ListBox1.Items.Add(' Alt: '+OldSize+' Neu: '+NewSize); end; end; end else begin if not chklist then Status := ' OK' else Status := ' NEU';
if (Pos(Form3.CheckBox1.Hint, ExtractShortPathName(Path)) > 0) or (Pos(Form3.CheckBox2.Hint, ExtractShortPathName(Path)) > 0) or (Pos(Form3.CheckBox3.Hint, ExtractShortPathName(Path)) > 0) or (Pos(Form3.CheckBox4.Hint, ExtractShortPathName(Path)) > 0) or (ExtractShortPathName(Path) = Form3.CheckBox5.Hint) or (ExtractShortPathName(Path) = Form3.CheckBox6.Hint) or (ExtractShortPathName(Path) = Form3.CheckBox7.Hint) or (ExtractShortPathName(Path) = Form3.CheckBox8.Hint) then Status := ' ------------';
StringGrid1.Cells[2, List.Count] := Status;
if Status = ' ------------' then begin Form2.ListBox1.Items.Add(''); Form2.ListBox1.Items.Add('#'+Path+Search.Name); Form2.ListBox1.Items.Add(' Ignoriert'); end;
if Status = ' NEU' then begin Form2.ListBox1.Items.Add(''); Form2.ListBox1.Items.Add('#'+Path+Search.Name); Form2.ListBox1.Items.Add(' Neu erfasst'); end; end; end else begin if CheckBox1.Checked then Sound(200,125); StringGrid1.Cells[2, List.Count] := ' XXXXX'; Fail := True; Form2.ListBox1.Items.Add(''); Form2.ListBox1.Items.Add('#'+Path); Form2.ListBox1.Items.Add(' Fehler: Dateiwerte konnten nicht ermittelt werden.'); Form2.ListBox1.Items.Add(' Gelöscht: '+Path+ChkFile); Form2.ListBox1.Items.Add(' Die Prüfung kann nicht fortgesezt werden.'); Form2.ListBox1.Items.Add(' Prüfen Sie diesen Ordner erneut.'); EraseFile(Path+ChkFile); SysUtils.FindClose(Search); exit; end;
StringGrid1.Row := StringGrid1.RowCount-1; if List.Count > 1 then StringGrid1.RowCount := StringGrid1.RowCount+1; StringGrid1.Refresh;
except ; end;
Inc(Counter); Application.ProcessMessages;
if not chklist then if not FileExists(GetWord(List2[Counter],1)) then begin List2.Delete(Counter);
List2.Text := ShiftStr(List2.Text,85); try if List2[List2.Count-1] = 'b_' then List2.Delete(List2.Count-1); except ; end;
try if (Pos(Form3.CheckBox1.Hint, ExtractShortPathName(Path)) = 0) and (Pos(Form3.CheckBox2.Hint, ExtractShortPathName(Path)) = 0) and (Pos(Form3.CheckBox3.Hint, ExtractShortPathName(Path)) = 0) and (Pos(Form3.CheckBox4.Hint, ExtractShortPathName(Path)) = 0) and not (ExtractShortPathName(Path) = Form3.CheckBox5.Hint) and not (ExtractShortPathName(Path) = Form3.CheckBox6.Hint) and not (ExtractShortPathName(Path) = Form3.CheckBox7.Hint) and not (ExtractShortPathName(Path) = Form3.CheckBox8.Hint) then List2.SaveToFile(Path+ChkFile);
except Form2.ListBox1.Items.Add(' Konnte nicht gespeichert werden: '+Path+ChkFile); end;
List2.Clear; end;
until FindNext(Search) <> 0;
SysUtils.FindClose(Search);
if chklist then if List2.Count > 0 then begin List2.Text := ShiftStr(List2.Text,85); try if List2[List2.Count-1] = 'b_' then List2.Delete(List2.Count-1); except ; end;
try if (Pos(Form3.CheckBox1.Hint, ExtractShortPathName(Path)) = 0) and (Pos(Form3.CheckBox2.Hint, ExtractShortPathName(Path)) = 0) and (Pos(Form3.CheckBox3.Hint, ExtractShortPathName(Path)) = 0) and (Pos(Form3.CheckBox4.Hint, ExtractShortPathName(Path)) = 0) and not (ExtractShortPathName(Path) = Form3.CheckBox5.Hint) and not (ExtractShortPathName(Path) = Form3.CheckBox6.Hint) and not (ExtractShortPathName(Path) = Form3.CheckBox7.Hint) and not (ExtractShortPathName(Path) = Form3.CheckBox8.Hint) then List2.SaveToFile(Path+ChkFile); except Form2.ListBox1.Items.Add(' Konnte nicht gespeichert werden: '+Path+ChkFile); end;
List2.Clear; end;
Counter := 0; List2.Clear; finally try Free; except ; end; end;
if SubFolder then begin if FindFirst(Path + '*.*', faDirectory, Search) = 0 then begin repeat if ((Search.Attr and faDirectory) = faDirectory) and (Search.Name[1] <> '.') then FindExecutableFiles(Path + Search.Name, Mask, List, SubFolder);
until FindNext(Search) <> 0; SysUtils.FindClose(Search); end; end;
if (Pos(Form3.CheckBox1.Hint, ExtractShortPathName(Path)) > 0) and (Pos(Form3.CheckBox2.Hint, ExtractShortPathName(Path)) > 0) and (Pos(Form3.CheckBox3.Hint, ExtractShortPathName(Path)) > 0) and (Pos(Form3.CheckBox4.Hint, ExtractShortPathName(Path)) > 0) or (ExtractShortPathName(Path) = Form3.CheckBox5.Hint) or (ExtractShortPathName(Path) = Form3.CheckBox6.Hint) or (ExtractShortPathName(Path) = Form3.CheckBox7.Hint) or (ExtractShortPathName(Path) = Form3.CheckBox8.Hint) then try EraseFile(Path+ChkFile); except ; end;
try SysUtils.FindClose(Search); except ; end; end; |
_________________ gedunstig war's - und fahle wornen zerschellten karsig im gestrock. oh graus, es gloomt der jabberwock - und die graisligen gulpen nurmen!
|
|
MSCH
      
Beiträge: 1448
Erhaltene Danke: 3
W7 64
XE2, SQL, DevExpress, DevArt, Oracle, SQLServer
|
Verfasst: Mo 31.05.04 09:06
waaahnsinn, wenn ich solche Mamutproceduren lese, krieg ich immer Bauchschmerzen  .
Was hälst du davon, zuerst mal die Funktion auseinanderzunehmen und einzelne kleinere Module zu schreiben? Das kann kein Anderer nachverfolgen.Versuch dabei, die lokalen Variablen so wenig wie möglich zu definieren und greife statt dessen auf Objekt-Variablen zurück. Es reicht ja, z.b. die FileAttribute Global einmal zu deklarieren und nicht ständig in der Funktion.
- Statt if () verwende lieber Sets z.b. if Ord(searchname[i] in (Set of Char) then ...
- Statt der Funktionen GetFileDateTime und GeFileAttr verwende die TSearch-Record Eigenschaften
Wenn Du auf die Listbox zugreifst, schreibe vor Zugriff Listbox.Items.BeginUpdate und abschließend EndUpdate. Geht schneller
Desgleichen die vielen If() mit Newsize(Attribute). Das geht einfacher mit "and"
z.b. if SearchRecord.FileAttr and faArchive = faArchive then S:=S+'A' uns so weiter
grez
msch
_________________ ist das politisch, wenn ich linksdrehenden Joghurt haben möchte?
|
|
galagher 
      
Beiträge: 2562
Erhaltene Danke: 46
Windows 10 Home
Delphi 10.1 Starter, Lazarus 2.0.6
|
Verfasst: Mo 31.05.04 11:22
| MSCH hat folgendes geschrieben: | | Was hälst du davon, zuerst mal die Funktion auseinanderzunehmen und einzelne kleinere Module zu schreiben? |
Habe zunächst mal die gesamte Dateiüberprüfung optimiert, wie du vorgeschlagen hast. Die Prüfung auf Sonderzeichen im Namen klappt mit Set nicht - Leerzeichen werden als Sonderzeichen erkannt. Jetzt dauert es zwar länger bis zum Stillstand, aber der Speicher nimmt trotzdem noch ab, trotz FindClose. Anfangs läuft es stabil, der Speicher bleibt konstant hoch und sinkt dann kontiniierlich, bis er zwischen 0 und 4096 hin und her pendelt.
Das Problem liegt irgendwo in der Dateiprüfung, denn wenn ich die zur Gänze weglasse, klappt alles. Bloss, dass die Dateiprüfung der eigtl. Sinn des Programms ist!
Danke für eure Hilfe, aber unter diesen Umständen werde ich's löschen. Bevor ich alles zerlege und das bringt auch nichts.
_________________ gedunstig war's - und fahle wornen zerschellten karsig im gestrock. oh graus, es gloomt der jabberwock - und die graisligen gulpen nurmen!
|
|
raziel
      
Beiträge: 2453
Arch Linux
JS (WebStorm), C#, C++/CLI, C++ (VS2013)
|
Verfasst: Mo 31.05.04 11:45
kurz angemerkt was mir grad aufgefallen ist: Du übergibst "List" immer wieder an die Funktion und schreibst jedesmal was rein. -> List wird immer größer. Is das mit "abgeschaltet" wenn du diese "Dateiprüfung" weglässt? Evtl könnts da dran liegen...
[klugscheiß]
Schließlich bleiben imho Parameter und lokale Variablen solange auf dem Stack, bis die Funktion endet.
[/klugscheiß]
raziel
_________________ JSXGraph
|
|
MartinPb
      
Beiträge: 698
|
Verfasst: Mo 31.05.04 11:57
Eine Frage: welches Betriebssystem?
_________________ Gruß
Martin
|
|
galagher 
      
Beiträge: 2562
Erhaltene Danke: 46
Windows 10 Home
Delphi 10.1 Starter, Lazarus 2.0.6
|
Verfasst: Mo 31.05.04 12:44
| raziel hat folgendes geschrieben: | | kurz angemerkt was mir grad aufgefallen ist: Du übergibst "List" immer wieder an die Funktion und schreibst jedesmal was rein. -> List wird immer größer. |
List ist übriggeblieben von ersten Versuchen. Ich kann auch direkt StringGrid1 nehmen, das ist aber egal. Statt List zähle ich jetzt einfach die Zeilen mit einer LongInt. Trotzdem, der Fehler tritt immer noch auf.
_________________ gedunstig war's - und fahle wornen zerschellten karsig im gestrock. oh graus, es gloomt der jabberwock - und die graisligen gulpen nurmen!
|
|
galagher 
      
Beiträge: 2562
Erhaltene Danke: 46
Windows 10 Home
Delphi 10.1 Starter, Lazarus 2.0.6
|
Verfasst: Mo 31.05.04 12:45
| MartinPb hat folgendes geschrieben: | | Eine Frage: welches Betriebssystem? |
Windows Me.
_________________ gedunstig war's - und fahle wornen zerschellten karsig im gestrock. oh graus, es gloomt der jabberwock - und die graisligen gulpen nurmen!
|
|
galagher 
      
Beiträge: 2562
Erhaltene Danke: 46
Windows 10 Home
Delphi 10.1 Starter, Lazarus 2.0.6
|
Verfasst: Mo 31.05.04 13:01
Was auch seltsam ist, dass Windows dann so langsam bleibt: Dateien werden zT. langsam geöffnst, Delphi kompiliert zwar normal, am Ende des Vorgangs steht dann aber für Sekunden das Compiler-Fenster am Bildschirm und zeigt "Abbrechen", dann erst wechselt der Button auf "Ok" - das geht ja normal blitzschnell.
_________________ gedunstig war's - und fahle wornen zerschellten karsig im gestrock. oh graus, es gloomt der jabberwock - und die graisligen gulpen nurmen!
|
|
MartinPb
      
Beiträge: 698
|
Verfasst: Mo 31.05.04 13:04
Es gibt das leidige Thema der Ressourcen unter Windows 95 und 98 (diese Systeme haben nur 64Kbyte für die Verwaltung der Ressourcen). Müßte aber auch für Me gelten, da Me eigentlich nur ein erweitertes 98 ist. Sind unter 95 und 98 die Ressourcen verbraucht, dann geht alles in den Keller. Sowas ereicht man schon mit einfachen Löschen oder Umbenennen von Dateien. Ich schätze, daß das auch für Me gilt.
Ob es allerdings die Antwort auf dein Problem ist, weiß ich nicht. Es wäre aber eine mögliche Antwort.
_________________ Gruß
Martin
|
|
galagher 
      
Beiträge: 2562
Erhaltene Danke: 46
Windows 10 Home
Delphi 10.1 Starter, Lazarus 2.0.6
|
Verfasst: Mo 31.05.04 13:18
| MartinPb hat folgendes geschrieben: | | Sind unter 95 und 98 die Ressourcen verbraucht, dann geht alles in den Keller. |
Und wie kann man Windows beibringen, dass es da nichts an meinem Prog gibt, was unbedingt im Speicher bleiben muss? Sobald ein Ordner durchgelaufen ist, weg mit dem Zeug, braucht ja keiner! Bevor ich es endgültig lösche, werde ich es mal auf einem XP-System testen! Danke!!!
_________________ gedunstig war's - und fahle wornen zerschellten karsig im gestrock. oh graus, es gloomt der jabberwock - und die graisligen gulpen nurmen!
|
|
MartinPb
      
Beiträge: 698
|
Verfasst: Mo 31.05.04 13:30
Das ist die Ressourcen-Verwaltung von Windows und die ist Müll. Der kannst du nichts beibringen. Die einzige Möglichkeit ist auf 2000 oder XP umzusteigen. Die haben die 64kByte Grenze nicht. Andere Möglichkeit wäre dein Betriebssystem neu zu installieren. Das Problem liegt nicht 100% an Windows, sondern an vielen Unterprogrammen die die Ressourcen verbrauchen. Irgendwann ist die Wanne fast voll und es reicht nur paar Dateien zu löschen um es voll zu machen. Dann geht nichts mehr, bzw. fast nichts mehr.
_________________ Gruß
Martin
|
|
biochip2
Hält's aus hier
Beiträge: 15
Win 2000
|
Verfasst: Mo 31.05.04 18:56
Ich habe dein Programm nicht angesehen da aber bei rekursiven Programmem je nach Verschachtlungstiefe und der Stackspeicher zu klein gewählt Probleme bringt bis zum Absturz.
Den vor eingestellten Stackspeicher vergrössern.Ich habe bestimmt nicht recht aber eine Möglichkeit wärs.
MfG
Frank
|
|
galagher 
      
Beiträge: 2562
Erhaltene Danke: 46
Windows 10 Home
Delphi 10.1 Starter, Lazarus 2.0.6
|
Verfasst: Mo 31.05.04 19:09
| biochip2 hat folgendes geschrieben: | | Den vor eingestellten Stackspeicher vergrössern.Frank |
Danke für die Antwort! Der Stackspeicher ist, oder besser, war (hab das Projekt gelöscht, hab's nur noch auf Diskette), auf Maximum. Mit einem RAM-Defrag-Programm ging es besser, aber immer noch nicht gut. Liegt offenbar doch an Windows!
Trotzdem: DANKE an alle! Hab' trotzdem wieder was gelernt!
_________________ gedunstig war's - und fahle wornen zerschellten karsig im gestrock. oh graus, es gloomt der jabberwock - und die graisligen gulpen nurmen!
|
|
|